Positioning your aquarium
Ensure your fish tank is placed on a level surface suitable for bearing the weight of your full aquarium - we recommend you purchase the specific model cabinet for the aquarium (one litre of water weighs exactly one kilogram, so calculate the weight of your aquarium including the weight of the glass tank itself).
Position the aquarium so you can get the maximum enjoyment from it however avoiding:
- Direct sunlight
- Extreme temperature variations (next to a radiator)
- Areas subject to loud noise, vibrations or movement
Adding substrate
Once you’ve picked your chosen substrate (gravel/sand) make sure to give it a good wash to remove any dirt or dust which will cloud the water.
Adding decor
Soak any rocks, wood, plastic plants or ornaments before adding them to the tank to remove anything that may colour the water or affect the chemical balance of the aquarium (do not use anything other than plain water to clean these items).
You can then position these as you like throughout the tank leaving open areas and hiding spaces for your fish to explore. It is important to ensure décor is embedded into the substrate and stable to ensure it is not easily dug up by your livestock.
Installing a heater
If your aquarium fish or shrimp require heated water (tropical freshwater) it is now time to install your heater following the manufacturer’s instructions.
DO NOT TURN ON YOUR HEATER YET.
We advise you add an aquarium thermometer to the aquarium so you can monitor the temperature ongoing.
Installing your filter
Install your filter following the instructions. Bear in mind that some aquariums come with built in filters and therefore may only need media adding to it whilst others come with a separate filter which must be installed.
Remember – When installing your aquarium or electricals like filters, heating or lighting make sure you create a drip loop in any cables to ensure drops of water cannot reach the mains electricity.
Filling your aquarium
Once all of your hardware is installed and you are happy with the positioning of your décor you can begin to fill your aquarium.
Place a plate, small bowl or plastic bag on to the aquarium substrate and carefully pour the water on it. This will help to prevent your substrate being disrupted and clouding.
Adding live plants
If you want to have live plants in your aquarium now is the time to add them.
Once your aquarium is roughly half full, stop filling and start to arrange your plants and begin to embed the roots into the substrate.
It’s important to plan ahead with your plants.
Once all of your plants are in place, carefully fill up the rest of the aquarium.
Making the water safe
Once your aquarium is full you can switch on your filter and heater to start preparing the tank for your aquatic friends.
You should always treat new water with a dechlorinator to remove harmful chemicals from the water and introduce aloe vera to help protect your fish’s delicate skin and gills.
Leaving the aquarium to settle
Although you will probably be excited to start adding fish into your aquarium, you need to let it settle and temperature stabilise to the recommended level before adding any livestock. Ideally you would leave the aquarium circulating for 5-7 days before adding livestock. Testing the waters PH before hand.
Adding fish
Once your tank has settled, and the temperature correct (use an aquarium thermometer for this) you can now add fish.
Speak to a member of the team to get the right fish for your set up. Make sure you’re not going to be overstocking, it’s better to introduce a few fish to start with whilst your filter is still maturing, then add more fish gradually over time.